Shop All Lighting
ALL LIGHTING
-

Agave Collection
Espadín Sconce$2,655.00 USDA handblown glass light with a wide, shallow form and faceted surface. An internal deflector maintains a soft, even field of light in direct view.
Each piece is individually handblown, and subtle variations in size, form, and color reflect the nature of the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Espadín Sconce
Clear
-

Agave Collection
Espadín Sconce$2,655.00 USDA handblown glass light with a wide, shallow form and faceted surface. An internal deflector maintains a soft, even field of light in direct view.
Each piece is individually handblown, and subtle variations in size, form, and color reflect the nature of the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Espadín Sconce
Obsidian
-

Agave Collection
Espadín Sconce$2,655.00 USDA handblown glass light with a wide, shallow form and faceted surface. An internal deflector maintains a soft, even field of light in direct view.
Each piece is individually handblown, and subtle variations in size, form, and color reflect the nature of the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Espadín Sconce
Cobre
-

Agave Collection
Espadín Sconce$2,655.00 USDA handblown glass light with a wide, shallow form and faceted surface. An internal deflector maintains a soft, even field of light in direct view.
Each piece is individually handblown, and subtle variations in size, form, and color reflect the nature of the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Espadín Sconce
Sierra
-

Piedra Collection
Sconce$2,375.00 USDA stone wall sconce with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Milk Onyx Sconce
PIEDRA
-

Piedra Collection
Semi Flush$2,375.00 USDA stone ceiling fixture with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Milk Onyx Semi Flush
PIEDRA
-

Piedra Collection
Sconce$2,375.00 USDA stone wall sconce with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Travertine Marble Sconce
PIEDRA
-

Piedra Collection
Semi Flush$2,375.00 USDA stone ceiling fixture with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Travertine Marble Semi Flush Mount
PIEDRA
-

Atzompa Collection
Ajedrez Pendant Light, Size A$2,095.00 – $2,195.00Price range: $2,095.00 through $2,195.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of square openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–White Washed
3D MODEL–Esmalte Verde
3D MODEL–TerracottaREQUEST A QUOTE
Ajedrez Pendant, Size A
ATZOMPA
-

Atzompa Collection
Ajedrez Pendant Light, Size B$2,395.00 – $2,495.00Price range: $2,395.00 through $2,495.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of square openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSREQUEST A QUOTE
Ajedrez Pendant, Size B
ATZOMPA
-

Atzompa Collection
Ajedrez Pendant Light, Size C$3,295.00 – $3,395.00Price range: $3,295.00 through $3,395.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of square openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSREQUEST A QUOTE
Ajedrez Pendant, Size C
ATZOMPA
-

Atzompa Collection
Ajedrez Pendant Light, Size D$4,250.00 – $4,350.00Price range: $4,250.00 through $4,350.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of square openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSPlease contact us for a shipping quote and/or to purchase.
REQUEST A QUOTE
Ajedrez Pendant, Size D
ATZOMPA
-

Agave Collection
Tobalá Pendant$2,950.00 USDA handblown glass pendant with a rounded, full-bodied silhouette and vertical ribbing. The concealed light source allows the glass to cast a soft, even glow.
Each piece is individually formed; slight variations in size, form and color are inherent to the process.
Lead time 8–12 weeks.
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Tobalá Pendant
Clear
-

Agave Collection
Tobalá Pendant$2,950.00 USDA handblown glass pendant with a rounded, full-bodied silhouette and vertical ribbing. The concealed light source allows the glass to cast a soft, even glow.
Each piece is individually formed; slight variations in size, form and color are inherent to the process.
Lead time 8–12 weeks.
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Tobalá Pendant
Obsidian
-

Agave Collection
Tobalá Pendant$2,950.00 USDA handblown glass pendant with a rounded, full-bodied silhouette and vertical ribbing. The concealed light source allows the glass to cast a soft, even glow.
Each piece is individually formed; slight variations in size, form and color are inherent to the process.
Lead time 8–12 weeks.
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Tobalá Pendant
Cobre
-

Agave Collection
Tobalá Pendant$2,950.00 USDA handblown glass pendant with a rounded, full-bodied silhouette and vertical ribbing. The concealed light source allows the glass to cast a soft, even glow.
Each piece is individually formed; slight variations in size, form and color are inherent to the process.
Lead time 8–12 weeks.
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Tobalá Pendant
Sierra
-

Atzompa Collection
Diamantes Pendant Light, Size A$2,095.00 – $2,195.00Price range: $2,095.00 through $2,195.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of diamond openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta FinishREQUEST A QUOTE
Diamantes Pendant, Size A
ATZOMPA
-

Atzompa Collection
Diamantes Pendant Light, Size B$2,395.00 – $2,495.00Price range: $2,395.00 through $2,495.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of diamond openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta FinishREQUEST A QUOTE
Diamantes Pendant, Size B
ATZOMPA
-

Atzompa Collection
Diamantes Pendant Light, Size C$3,295.00 – $3,395.00Price range: $3,295.00 through $3,395.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of diamond openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSREQUEST A QUOTE
Diamantes Pendant, Size C
ATZOMPA
-

Atzompa Collection
Diamantes Pendant Light, Size D$4,250.00 – $4,350.00Price range: $4,250.00 through $4,350.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of diamond openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSPlease contact us for a shipping quote and/or to purchase.
REQUEST A QUOTE
Diamantes Pendant, Size D
ATZOMPA
-

Ventila Pendant
Woven Rattan$2,550.00 – $3,250.00Price range: $2,550.00 through $3,250.00 USDA generously sized, shallow disc of looped and interlocked rattan; light from multiple upward-facing sources washes the ceiling and spills into the room.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONSREQUEST A QUOTE
Natural Rattan Pendant 24"
VENTILA
-

Ventila Pendant
Woven Rattan$2,550.00 – $3,250.00Price range: $2,550.00 through $3,250.00 USDA generously sized, shallow disc of looped and interlocked rattan; light from multiple upward-facing sources washes the ceiling and spills into the room.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONSREQUEST A QUOTE
Mocha Rattan Pendant 34"
VENTILA
-

$2,375.00 USDA stone wall sconce with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Terra Onyx Sconce
PIEDRA
-

Piedra Collection
Semi Flush$2,375.00 USDA stone ceiling fixture with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Terra Onyx Semi Flush
PIEDRA
-

Agave Collection
Cuishe Pendant$2,450.00 USDA handblown glass pendant with a tall, tapered silhouette. The concealed light source allows the glass to cast a soft, even glow.
Each piece is individually formed; slight variations in size, form and color are inherent to the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Cuishe Pendant
Clear
-

Agave Collection
Cuishe Pendant$2,450.00 USDA handblown glass pendant with a tall, tapered silhouette. The concealed light source allows the glass to cast a soft, even glow.
Each piece is individually formed; slight variations in size, form and color are inherent to the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Cuishe Pendant
Obsidian
-

Agave Collection
Cuishe Pendant$2,450.00 USDA handblown glass pendant with a tall, tapered silhouette. The concealed light source allows the glass to cast a soft, even glow.
Each piece is individually formed; slight variations in size, form and color are inherent to the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Cuishe Pendant
Cobre
-

Agave Collection
Cuishe Pendant$2,450.00 USDA handblown glass pendant with a tall, tapered silhouette. The concealed light source allows the glass to cast a soft, even glow.
Each piece is individually formed; slight variations in size, form and color are inherent to the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Cuishe Pendant
Sierra
-

Piedra Collection
Sconce$2,375.00 USDA stone wall sconce with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Black + White Onyx Sconce
PIEDRA
-

Piedra Collection
Black + White Onyx Semi Flush$2,375.00 USDA stone ceiling fixture with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Black + White Onyx Semi Flush
PIEDRA
-

Árbol Table Lamps
TARARA L44$1,635.00 USDA lathe-turned ovoid hardwood base paired with a conical linen shade.
Each piece is one of a kind; grain, color, and tonality vary between pieces.
Lead time 2–3 weeks
[member_only]SPEC SHEET[/member_only][non_member]SPEC SHEET[/non_member]
REQUEST A QUOTE
Tarara Table Lamp L44
ÁRBOL
-

Árbol Table Lamps
Morado L46$1,745.00 USDA lathe-turned ovoid hardwood base paired with a conical linen shade.
Each piece is one of a kind; grain, color, and tonality vary between pieces.
Lead time 2–3 weeks
[member_only]SPEC SHEET[/member_only][non_member]SPEC SHEET[/non_member]
REQUEST A QUOTE
Morado Table Lamp L46
ÁRBOL
-

Saddle Lamps
Capa Table Lamp$2,695.00 USDA leather table lamp with a wide, open shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA TABLE LAMPREQUEST A QUOTE
Almendra Capa Table Lamp
SADDLE LAMPS
-

Saddle Lamps
Doma Table Lamp, Almendra$2,695.00 USDA leather table lamp with a rounded, dome-shaped shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–DOMA TABLE LAMPREQUEST A QUOTE
Almendra Doma Table Lamp
SADDLE LAMPS
-

Saddle Lamps
Capa Floor Lamp$4,095.00 USDA leather floor lamp with a wide, open shade and scalloped edge on a tall brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA FLOOR LAMPREQUEST A QUOTE
Almendra Capa Floor Lamp
SADDLE LAMPS
-

Saddle Lamps
Doma Table Lamp, Almendra$2,695.00 USDA leather table lamp with a rounded, dome-shaped shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–DOMA TABLE LAMPREQUEST A QUOTE
Almendra Doma Floor Lamp
SADDLE LAMPS
-

Talabartero Saddle Lamps
Capa Pendant Light$2,825.00 USDA leather pendant with a wide, open shade and scalloped edge. The open form directs light upward, casting an ambient glow across the ceiling.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA PENDANTREQUEST A QUOTE
Alemendra Capa Pendant
SADDLE LAMPS
-

Saddle Lamps
Capa II Pendant Light$2,895.00 USDA leather pendant with a wide, gently curved shade and scalloped edge. The form directs light downward in a soft, even spread.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA II PENDANTREQUEST A QUOTE
Almendra Capa II Pendant
SADDLE LAMPS
-

Talabartero Saddle Lamps
Doma Pendant Light$2,895.00 USDA leather pendant with a rounded, dome-shaped shade and scalloped edge. The form directs light downward in a soft, even spread.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA PENDANTREQUEST A QUOTE
Alemendra Doma Pendant
SADDLE LAMPS
-

Saddle Lamps
Doma Arched Sconce$3,050.00 – $3,250.00Price range: $3,050.00 through $3,250.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Almendra Doma Sconce, Small
SADDLE LAMPS
-

Saddle Lamps
Doma Arched Sconce$3,050.00 – $3,250.00Price range: $3,050.00 through $3,250.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Almendra Doma Sconce, Large
SADDLE LAMPS
-

Talabartero Saddle Lamps
Noma Sconce$2,175.00 USDA leather wall sconce with a spherical, paneled form mounted on a brass backplate. Can also be installed as a semi flush ceiling fixture.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–NOMA SCONCEREQUEST A QUOTE
Alemendra Noma Sconce
SADDLE LAMPS
-

$1,965.00 USDA rectangular hardwood form with a hand-chiseled face, mounted on a brushed brass backing. Light radiates from all edges of the fixture.
The chiseled face reads as wall-mounted relief when unlit; designed to be installed individually or arranged in compositions.
Lead time 4–6 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–MARTILLADO SCONCEREQUEST A QUOTE
Morado Sconce
MARTILLADO
-

$1,965.00 USDA rectangular hardwood form with a hand-chiseled face, mounted on a brushed brass backing. Light radiates from all edges of the fixture.
The chiseled face reads as wall-mounted relief when unlit; designed to be installed individually or arranged in compositions.
Lead time 4–6 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–MARTILLADO SCONCEREQUEST A QUOTE
Tarara Sconce
MARTILLADO
-

Agave Collection
Espadín Mini Sconce$2,350.00 USDA handblown glass light with a compact silhouette and subtle surface articulation. An internal deflector maintains a soft, even field of light in direct view.
Each piece is individually handblown, and subtle variations in size, form, and color reflect the nature of the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Espadín Mini Sconce
Clear
-

Agave Collection
Espadín Mini Sconce$2,350.00 USDA handblown glass light with a compact silhouette and subtle surface articulation. An internal deflector maintains a soft, even field of light in direct view.
Each piece is individually handblown, and subtle variations in size, form, and color reflect the nature of the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Espadín Mini Sconce
Obsidian
-

Agave Collection
Espadín Mini Sconce$2,350.00 USDA handblown glass light with a compact silhouette and subtle surface articulation. An internal deflector maintains a soft, even field of light in direct view.
Each piece is individually handblown, and subtle variations in size, form, and color reflect the nature of the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Espadín Mini Sconce
Cobre
-

Agave Collection
Espadín Mini Sconce$2,350.00 USDA handblown glass light with a compact silhouette and subtle surface articulation. An internal deflector maintains a soft, even field of light in direct view.
Each piece is individually handblown, and subtle variations in size, form, and color reflect the nature of the process.
Lead time 8–12 weeks
SPEC SHEET
3D MODEL–Clear
3D MODEL–Obsidian
3D MODEL–Cobre
3D MODEL–SierraREQUEST A QUOTE
Espadín Mini Sconce
Sierra
-

Flor de Bronce Collection
Lirio Pendant$2,495.00 USDA cast bronze pendant with a tapered form. Designed to be installed individually or composed in multiples.
Each piece is individually cast using the lost-wax process; slight variations in surface and tone are inherent to the material.
Lead time 4–6 weeks
Multiport canopy lead time 8–10 weeks
SPEC SHEET
MULTI-PORT CANOPY SPEC SHEET
3D MODEL–Brasa
3D MODEL–Verdigris
3D MODEL–SepiaREQUEST A QUOTE
Lirio Pendant
Brasa
-

Flor de Bronce Collection
Lirio Pendant$2,495.00 USDA cast bronze pendant with a tapered form. Designed to be installed individually or composed in multiples.
Each piece is individually cast using the lost-wax process; slight variations in surface and tone are inherent to the material.
Lead time 4–6 weeks
Multiport canopy lead time 8–10 weeks
SPEC SHEET
MULTI-PORT CANOPY SPEC SHEET
3D MODEL–Brasa
3D MODEL–Verdigris
3D MODEL–SepiaREQUEST A QUOTE
Lirio Pendant
Verdigris
-

Flor de Bronce Collection
Lirio Pendant$2,495.00 USDA cast bronze pendant with a tapered form. Designed to be installed individually or composed in multiples.
Each piece is individually cast using the lost-wax process; slight variations in surface and tone are inherent to the material.
Lead time 4–6 weeks
Multiport canopy lead time 8–10 weeks
SPEC SHEET
MULTI-PORT CANOPY SPEC SHEET
3D MODEL–Brasa
3D MODEL–Verdigris
3D MODEL–SepiaREQUEST A QUOTE
Lirio Pendant
Sepia
-

Flor de Bronce Collection
Capullo Sconce$2,895.00 USDA cast bronze wall light with a curved form. Rated for both indoor and outdoor installation.
Each piece is individually cast using the lost-wax process; slight variations in surface and tone are inherent to the material.
Lead time 4–6 weeks
SPEC SHEET
3D MODEL–Brasa
3D MODEL–Verdigris
3D MODEL–SepiaREQUEST A QUOTE
Capullo Sconce
Brasa
-

Flor de Bronce Collection
Capullo Sconce$2,895.00 USDA cast bronze wall light with a curved form. Rated for both indoor and outdoor installation.
Each piece is individually cast using the lost-wax process; slight variations in surface and tone are inherent to the material.
Lead time 4–6 weeks
SPEC SHEET
3D MODEL–Brasa
3D MODEL–Verdigris
3D MODEL–SepiaREQUEST A QUOTE
Capullo Sconce
Verdigris
-

Flor de Bronce Collection
Capullo Sconce$2,895.00 USDA cast bronze wall light with a curved form. Rated for both indoor and outdoor installation.
Each piece is individually cast using the lost-wax process; slight variations in surface and tone are inherent to the material.
Lead time 4–6 weeks
SPEC SHEET
3D MODEL–Brasa
3D MODEL–Verdigris
3D MODEL–SepiaREQUEST A QUOTE
Capullo Sconce
Sepia
-

Werregue Collection
Las Palmas Pendant$2,975.00 USDThis design represents the very werregue palms from which these pieces are woven. The palm patterning can reflect either a flower or a spike, depending on the angle viewed.
The woven fiber produces an opaque shade; light exits as a focused downward beam from the open base.
Each pendant is one-of-a-kind.
Lead time 1–2 weeks
REQUEST A QUOTE
Las Palmas Pendant, X-Large
WERREGUE
-

Werregue Collection
Rios Y Riacheulos Pendant$3,250.00 USDThe patterning on this piece is inspired by rivers and streams as they flow through the jungles, where white represents the land and black, the water currents.
The woven fiber produces an opaque shade; light exits as a focused downward beam from the open base.
Each pendant is one-of-a-kind.
Lead time 1–2 weeks
REQUEST A QUOTE
Rios y Riacheulos Pendant, X-Large
WERREGUE
-

Saddle Lamps
Capa Table Lamp$2,695.00 USDA leather table lamp with a wide, open shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA TABLE LAMPREQUEST A QUOTE
Negro Capa Table Lamp
SADDLE LAMPS
-

Saddle Lamps
Doma Table Lamp$2,695.00 USDA leather table lamp with a rounded, dome-shaped shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–DOMA TABLE LAMPREQUEST A QUOTE
Negro Capa Pendant
SADDLE LAMPS
-

Saddle Lamps
Capa Floor Lamp$4,095.00 USDA leather floor lamp with a wide, open shade and scalloped edge on a tall brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA FLOOR LAMPREQUEST A QUOTE
Negro Capa Floor Lamp
SADDLE LAMPS
-

Saddle Lamps
Doma Floor Lamp$4,095.00 USDA leather floor lamp with a rounded, dome-shaped shade and scalloped edge on a tall brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–DOMA FLOOR LAMPREQUEST A QUOTE
Negro Doma Floor Lamp
SADDLE LAMPS
-

Talabartero Saddle Lamps
Capa Pendant Light$2,825.00 USDA leather pendant with a wide, open shade and scalloped edge. The open form directs light upward, casting an ambient glow across the ceiling.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA PENDANTREQUEST A QUOTE
Negro Capa Pendant
SADDLE LAMPS
-

Saddle Lamps
Capa II Pendant Light$2,895.00 USDA leather pendant with a wide, gently curved shade and scalloped edge. The form directs light downward in a soft, even spread.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA II PENDANTREQUEST A QUOTE
Negro Capa II Pendant
SADDLE LAMPS
-

Talabartero Saddle Lamps
Doma Pendant Light$2,895.00 USDA leather pendant with a rounded, dome-shaped shade and scalloped edge. The form directs light downward in a soft, even spread.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA PENDANTREQUEST A QUOTE
Negro Doma Pendant
SADDLE LAMPS
-

Saddle Lamps
Doma Arched Sconce$3,050.00 – $3,250.00Price range: $3,050.00 through $3,250.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Negro Doma Sconce, Small
SADDLE LAMPS
-

Saddle Lamps
Doma Arched Sconce$3,050.00 – $3,250.00Price range: $3,050.00 through $3,250.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Negro Doma Sconce, Large
SADDLE LAMPS
-

Talabartero Saddle Lamps
Noma Sconce$2,175.00 USDA leather wall sconce with a spherical, paneled form mounted on a brass backplate. Can also be installed as a semi flush ceiling fixture.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
Negro Noma Sconce
SADDLE LAMPS
-

Ventila Pendant
Woven Rattan$2,550.00 – $3,250.00Price range: $2,550.00 through $3,250.00 USDA generously sized, shallow disc of looped and interlocked rattan; light from multiple upward-facing sources washes the ceiling and spills into the room.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONSREQUEST A QUOTE
Black Rattan Pendant 34"
VENTILA
-

Piedra Collection
Sconce$2,375.00 USDA stone wall sconce with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Black Marble Sconce
PIEDRA
-

Piedra Collection
Semi Flush$2,375.00 USDA stone ceiling fixture with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Black Onyx Semi Flush
PIEDRA
-

$2,375.00 USDA stone wall sconce with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Grey Marble Sconce
PIEDRA
-

Piedra Collection
Semi Flush$2,375.00 USDA stone ceiling fixture with a shallow, concave form and a centered globe light source. Available in marble and onyx.
Each piece is cut from a carefully selected stone block; variation in color, tone, veining, and pattern is inherent to the material.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only] [non_member]SPEC SHEET[/non_member]
INSTALL INSTRUCTIONS
3D MODEL–PIEDRA SCONCEREQUEST A QUOTE
Grey Marble Semi Flush
PIEDRA
-

Barro Bruñido Collection
Barro Negro Lamp$1,675.00 USDA rounded, bulbous burnished clay base with brass hardware, paired with a conical linen shade.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only][non_member]SPEC SHEET[/non_member]
REQUEST A QUOTE
Table Lamp, Black Shade
BARRO NEGRO
-

Barro Bruñido Collection
Barro Negro Lamp$1,675.00 USDA rounded, bulbous burnished clay base with brass hardware, paired with a conical linen shade.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only][non_member]SPEC SHEET[/non_member]
REQUEST A QUOTE
Table Lamp, White Shade
BARRO NEGRO
-

Barro Bruñido Collection
Barro Negro Lamp with Ball Pull$1,675.00 USDA rounded, bulbous burnished clay base with an optional ceramic ball detail on the pull chain, paired with a conical linen shade.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only][non_member]SPEC SHEET[/non_member]
REQUEST A QUOTE
Table Lamp with Ball Pull, White Shade
BARRO NEGRO
-

Barro Bruñido Collection
Barro Negro Lamp$1,675.00 USDA rounded, bulbous burnished clay base with brass hardware, paired with a conical linen shade.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only][non_member]SPEC SHEET[/non_member]
REQUEST A QUOTE
Table Lamp, Oatmeal Shade
BARRO NEGRO
-

Barro Bruñido Collection
Barro Negro Lamp with Ball Pull$1,675.00 USDA rounded, bulbous burnished clay base with an optional ceramic ball detail on the pull chain, paired with a conical linen shade.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only][non_member]SPEC SHEET[/non_member]
REQUEST A QUOTE
Table Lamp with Ball Pull, Oatmeal Shade
BARRO NEGRO
-

Barro Bruñido Collection
Barro Negro Lamp with Ball Pull$1,675.00 USDA rounded, bulbous burnished clay base with an optional ceramic ball detail on the pull chain, paired with a conical linen shade.
Lead time 4–6 weeks
[member_only]SPEC SHEET[/member_only][non_member]SPEC SHEET[/non_member]
REQUEST A QUOTE
Table Lamp with Ball Pull, Black Shade
BARRO NEGRO
-

Saddle Lamps
Capa Table Lamp$2,695.00 USDA leather table lamp with a wide, open shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA TABLE LAMPREQUEST A QUOTE
Palma Capa Table Lamp
SADDLE LAMPS
-

Saddle Lamps
Doma Table Lamp$2,695.00 USDA leather table lamp with a rounded, dome-shaped shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–DOMA TABLE LAMPREQUEST A QUOTE
Palma Doma Table Lamp
SADDLE LAMPS
-

Saddle Lamps
Capa Floor Lamp$4,095.00 USDA leather floor lamp with a wide, open shade and scalloped edge on a tall brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA FLOOR LAMPREQUEST A QUOTE
Palma Doma Floor Lamp
SADDLE LAMPS
-

Saddle Lamps
Doma Floor Lamp$4,095.00 USDA leather floor lamp with a rounded, dome-shaped shade and scalloped edge on a tall brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–DOMA FLOOR LAMPREQUEST A QUOTE
Palma Doma Floor Lamp
SADDLE LAMPS
-

Talabartero Saddle Lamps
Capa Pendant Light$2,825.00 USDA leather pendant with a wide, open shade and scalloped edge. The open form directs light upward, casting an ambient glow across the ceiling.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA PENDANTREQUEST A QUOTE
Palma Capa Pendant
SADDLE LAMPS
-

Saddle Lamps
Capa II Pendant Light$2,895.00 USDA leather pendant with a wide, gently curved shade and scalloped edge. The form directs light downward in a soft, even spread.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA II PENDANTREQUEST A QUOTE
Palma Capa II Pendant
SADDLE LAMPS
-

Talabartero Saddle Lamps
Noma Sconce$2,175.00 USDA leather wall sconce with a spherical, paneled form mounted on a brass backplate. Can also be installed as a semi flush ceiling fixture.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–NOMA SCONCEREQUEST A QUOTE
Palma Noma Sconce
SADDLE LAMPS
-

Talabartero Saddle Lamps
Doma Pendant Light$2,895.00 USDA leather pendant with a rounded, dome-shaped shade and scalloped edge. The form directs light downward in a soft, even spread.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA PENDANTREQUEST A QUOTE
Palma Doma Pendant
SADDLE LAMPS
-

Saddle Lamps
Doma Arched Sconce$3,050.00 – $3,250.00Price range: $3,050.00 through $3,250.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Palma Doma Sconce, Small
SADDLE LAMPS
-

Saddle Lamps
Doma Arched Sconce$3,050.00 – $3,250.00Price range: $3,050.00 through $3,250.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Palma Doma Sconce, Large
SADDLE LAMPS
-

Atzompa Collection
Diamantes Pendant Light, Size A$2,095.00 – $2,195.00Price range: $2,095.00 through $2,195.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of diamond openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta FinishREQUEST A QUOTE
Esmalte Verde Diamantes Pendant, Size A
ATZOMPA
-

Atzompa Collection
Diamantes Pendant Light, Size B$2,395.00 – $2,495.00Price range: $2,395.00 through $2,495.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of diamond openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta FinishREQUEST A QUOTE
Esmalte Verde Diamantes Pendant, Size B
ATZOMPA
-

Atzompa Collection
Diamantes Pendant Light, Size C$3,295.00 – $3,395.00Price range: $3,295.00 through $3,395.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of diamond openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSREQUEST A QUOTE
Esmalte Verde Diamantes Pendant, Size C
ATZOMPA
-

Atzompa Collection
Diamantes Pendant Light, Size D$4,250.00 – $4,350.00Price range: $4,250.00 through $4,350.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of diamond openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSPlease contact us for a shipping quote and/or to purchase.
REQUEST A QUOTE
Esmalte Verde Diamantes Pendant, Size D
ATZOMPA
-

Atzompa Collection
Ajedrez Pendant Light, Size A$2,095.00 – $2,195.00Price range: $2,095.00 through $2,195.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of square openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta FinishREQUEST A QUOTE
Esmalte Verde Ajedrez Pendant, Size A
ATZOMPA
-

Atzompa Collection
Ajedrez Pendant Light, Size B$2,395.00 – $2,495.00Price range: $2,395.00 through $2,495.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of square openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSREQUEST A QUOTE
Esmalte Verde Ajedrez Pendant, Size B
ATZOMPA
-

Atzompa Collection
Ajedrez Pendant Light, Size C$2,750.00 – $3,395.00Price range: $2,750.00 through $3,395.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of square openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSREQUEST A QUOTE
Esmalte Verde Ajedrez Pendant, Size C
ATZOMPA
-

Atzompa Collection
Ajedrez Pendant Light, Size D$4,250.00 – $4,350.00Price range: $4,250.00 through $4,350.00 USDA ceramic pendant with a rounded, tapered body and repeating rows of square openwork. The cutwork casts patterned light and shadow.
Each piece is individually formed and hand-cut; slight variations in size, form, and finish are inherent to the process.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL—White-Washed Finish
3D MODEL—Esmalte Verde Finish
3D MODEL—Terracotta Finish
INSTALL INSTRUCTIONSPlease contact us for a shipping quote and/or to purchase.
REQUEST A QUOTE
Esmalte Verde Ajedrez Pendant, Size D
ATZOMPA
-

Saddle Lamps
Doma Floor Lamp$4,095.00 USDA leather floor lamp with a rounded, dome-shaped shade and scalloped edge on a tall brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–DOMA FLOOR LAMPREQUEST A QUOTE
Cobalto Doma Floor Lamp
SADDLE LAMPS
-

Saddle Lamps
Capa Table Lamp$2,695.00 USDA leather table lamp with a wide, open shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA TABLE LAMPREQUEST A QUOTE
Cobalto Capa Table Lamp
SADDLE LAMPS
-

Saddle Lamps
Doma Table Lamp$2,695.00 USDA leather table lamp with a rounded, dome-shaped shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–DOMA TABLE LAMPREQUEST A QUOTE
Cobalto Doma Table Lamp
SADDLE LAMPS
-

Saddle Lamps
Capa II Pendant Light$2,895.00 USDA leather pendant with a wide, gently curved shade and scalloped edge. The form directs light downward in a soft, even spread.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA II PENDANTREQUEST A QUOTE
Cobalto Capa II Pendant
SADDLE LAMPS
-

Saddle Lamps
Capa Floor Lamp$4,095.00 USDA leather floor lamp with a wide, open shade and scalloped edge on a tall brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA FLOOR LAMPREQUEST A QUOTE
Cobalto Capa Floor Lamp
SADDLE LAMPS
-

Saddle Lamps
Doma Arched Sconce$3,050.00 – $3,250.00Price range: $3,050.00 through $3,250.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Cobalto Doma Sconce, Small
SADDLE LAMPS
-

Talabartero Saddle Lamps
Capa Pendant Light$2,825.00 USDA leather pendant with a wide, open shade and scalloped edge. The open form directs light upward, casting an ambient glow across the ceiling.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA PENDANTREQUEST A QUOTE
Cobalto Capa Pendant
SADDLE LAMPS
-

Talabartero Saddle Lamps
Doma Pendant Light$2,895.00 USDA leather pendant with a rounded, dome-shaped shade and scalloped edge. The form directs light downward in a soft, even spread.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA PENDANTREQUEST A QUOTE
Cobalto Doma Pendant
SADDLE LAMPS
-

Saddle Lamps
Doma Arched Sconce$3,050.00 – $3,250.00Price range: $3,050.00 through $3,250.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Cobalto Doma Sconce, Large
SADDLE LAMPS
-

Talabartero Saddle Lamps
Noma Sconce$2,175.00 USDA leather wall sconce with a spherical, paneled form mounted on a brass backplate. Can also be installed as a semi flush ceiling fixture.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–NOMA SCONCEREQUEST A QUOTE
Cobalto Noma Sconce
SADDLE LAMPS
-

Saddle Lamps
Capa Table Lamp$2,695.00 USDA leather table lamp with a wide, open shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA TABLE LAMPREQUEST A QUOTE
Mora Capa Pendant
SADDLE LAMPS
-

Talabartero Saddle Lamps
Capa Pendant Light$2,825.00 USDA leather pendant with a wide, open shade and scalloped edge. The open form directs light upward, casting an ambient glow across the ceiling.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA PENDANTREQUEST A QUOTE
Mora Capa Pendant
SADDLE LAMPS
-

Saddle Lamps
Capa Table Lamp$2,695.00 USDA leather table lamp with a wide, open shade and scalloped edge on a brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA TABLE LAMPREQUEST A QUOTE
Mora Capa Table Lamp
SADDLE LAMPS
-

Saddle Lamps
Capa Floor Lamp$4,095.00 USDA leather floor lamp with a wide, open shade and scalloped edge on a tall brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–CAPA FLOOR LAMPREQUEST A QUOTE
Mora Capa Floor Lamp
SADDLE LAMPS
-

Saddle Lamps
Doma Floor Lamp$4,095.00 USDA leather floor lamp with a rounded, dome-shaped shade and scalloped edge on a tall brass stem and base.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
3D MODEL–DOMA FLOOR LAMPREQUEST A QUOTE
Mora Doma Floor Lamp
SADDLE LAMPS
-

Saddle Lamps
Capa II Pendant Light$2,895.00 USDA leather pendant with a wide, gently curved shade and scalloped edge. The form directs light downward in a soft, even spread.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–CAPA II PENDANTREQUEST A QUOTE
Mora Capa II Pendant
SADDLE LAMPS
-

$3,050.00 – $3,250.00Price range: $3,050.00 through $3,250.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Mora Doma Sconce, Small
SADDLE LAMPS
-

Saddle Lamps
Doma Arched Sconce$2,750.00 – $2,950.00Price range: $2,750.00 through $2,950.00 USDA leather wall sconce with a rounded, dome-shaped shade mounted on an arched arm. Available in two sizes.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–DOMA ARCHED SCONCE–SMALL
3D MODEL–DOMA ARCHED SCONCE–LARGEREQUEST A QUOTE
Mora Doma Arched Sconce, Large
SADDLE LAMPS
-

Talabartero Saddle Lamps
Noma Sconce$2,175.00 USDA leather wall sconce with a spherical, paneled form mounted on a brass backplate. Can also be installed as a semi flush ceiling fixture.
Each piece is individually formed from board-formed leather; slight variations in surface and tone are inherent to the material.
Lead time 8–10 weeks
SPEC SHEET
INSTALL INSTRUCTIONS
3D MODEL–NOMA SCONCEREQUEST A QUOTE
Mora Noma Sconce
SADDLE LAMPS
Viewing 1-34 of 147 products



































































































